JESTER / ICEMAN SET COMMANDS

Published fixed-value commands from 10000 to 10099 for use by the mission editor (trigger action "X: Set command", see proxy_device.lua). Because these use fixed values it is not necessary to rebuild Command.h after adding/changing values in this range.

SET COMMAND can only accept numerical values >= -1 and <= 1. Several commands below encode an index into that range using the 0.XX convention (0.01 = item 1, 0.99 = item 99, 1.00 = item 100).

General / Pilot Commands

10000 — Enable ACM guns, air-to-air

• 1 — enables
• 0 — disables (default)

10001 — Carrier landing

• 1 — initiates the carrier landing sequence
• 0 — (default)

10002 — Ground landing

• 1 — initiates the ground landing sequence
• 0 — (default)

10003 — Case 1 recovery

• 1 — initiates a Case 1 recovery
• 0 — (default)

10004 — Pilot VSL (Vertical Scan Lock)

• 1 — commands the pilot to attempt a VSL lock
• 0 — (default)

10005 — Wings swept

• 1 — sweeps the wings
• 0 — (default)

10006 — Air-to-ground mode

• 1 — selects air-to-ground
• 0 — (default)

10007 — Parking brake

• 1 — sets the parking brake
• 0 — releases (default)

10008 — Radar weight-on-wheels (WOW)

• 1 — WOW asserted
• 0 — (default)

Jester LANTIRN / Targeting

10009 — Jester LANTIRN auto designate

• 1 — disables Jester LANTIRN auto designate
• 0 — enables Jester LANTIRN auto designate (default)

10010 — Jester silent

• 1 — silences Jester
• 0 — Jester will talk again (default)

10011 — Jester pause

• 1 — disables (pauses) Jester
• 0 — reactivates Jester (default)

10012 — Force Jester to track a target by unit name

Special command to force Jester to track a specific target using unit name. Since SET COMMAND only accepts values >= -1 and <= 1, the following rule is used:

• 0.01 — track unit named LantirnTarget01
• 0.02 — track unit named LantirnTarget02 (… continues …)
• 0.99 — track unit named LantirnTarget99
• 1.00 — track unit named LantirnTarget100
• 0 — resume Jester state to normal operations

10013 — Force Jester to track a zone

Same as 10012, but Jester tracks zones.

• 0.01 — track zone named LantirnZone01
• 0.02 — track zone named LantirnZone02 (… continues …)
• 0.99 — track zone named LantirnZone99
• 1.00 — track zone named LantirnZone100
• 0 — resume Jester state to normal operations

Note: Commands 10012 and 10013 are exclusive. When Jester is tracking a unit using 10012, activating 10013 forces Jester to stop tracking that unit and start tracking a zone, and vice versa. Using 0 in either command stops tracking both units and zones.

10014 — Manual designate

Jester will designate manually what is under the LANTIRN cross.

Radio / Navigation

10015 — Tune AN/ARC-182 to a selected channel

• Pass the value as 0.XX where XX is the two-digit channel number.

10016 — Tune TACAN channel

Construct the value as s0.XXXY, where:

• s — optional - sign; use negative values for A/A and positive for T/R
• XXX — three-digit channel number (keep the leading zeroes for channels lower than 100)
• Y — 0 for X-mode, 1 for Y-mode

Examples:

• 0.0630 — channel 63X, T/R
• -0.0081 — channel 8Y, A/A

10017 — DEST knob

• 0.1 — WP1
• 0.2 — WP2
• 0.3 — WP3
• 0.4 — FP
• 0.5 — IP
• 0.6 — ST
• 0.7 — HB
• 0.8 — MAN

10018 — Select waypoint to enter coords from a trigger zone

💡 This command does no action in the cockpit

• 0.1 — WP1
• 0.2 — WP2
• 0.3 — WP3
• 0.4 — FP
• 0.5 — IP
• 0.6 — ST
• 0.7 — HB
• 0.8 — MAN

10019 — Enter coords from trigger zone

Enter coords from a trigger zone for the waypoint selected with 10018 (if none selected, WP1).

• 0.01 — WaypointZone01
• 0.02 — WaypointZone02
• (… continues …)
• 0.99 — WaypointZone99
• -0.01 — GGWZone01 (negative values select GGW zones)
• (… continues …)
• -0.99 — GGWZone99

Jester Systems

10020 — WCS switch

• 0.1 — OFF
• 0.2 — STBY
• 0.3 — ON
• 0.0 — return to automatic

10021 — Run RWR BIT

• No value parameter; runs the RWR built-in test.

10022 — TID range knob

• 0.1 — 25 NM
• 0.2 — 50 NM
• 0.3 — 100 NM
• 0.4 — 200 NM
• 0.5 — 400 NM
• 0.0 — return to automatic

10023 — Jester Eject

• Commands Jester to eject.

Jester Radar / Air-to-Air

10024 — STT target

• 0.00 — stop force STT track
• 0.01 — AirTarget01
• 0.02 — AirTarget02
• (… continues …)
• 0.99 — AirTarget99

10025 — Break lock

• Drops the current track.

10033 — Radar azimuth

• Accepts -1 to 1.

10034 — Radar elevation

• Accepts -1 to 1.

Jester Weapons

10026 — Weapon station state

Format 0.xy:

• x — station number (1–8)
• y — state: 0 down (safe), 1 up (selected)

10027 — Weapon wheel option

• 0.10 — MK-81H
• 0.11 — MK-81L
• 0.12 — MK-82H
• 0.13 — MK-82L
• 0.14 — MK-83H
• 0.15 — MK-83L
• 0.16 — MK-84
• 0.17 — LAU-10
• 0.19 — CBU-59A
• 0.20 — CBU-59B
• 0.21 — CBU-59C
• 0.22 — MK-20A
• 0.23 — MK-20B
• 0.24 — MK-20C
• 0.25 — MK-45
• 0.26 — GBU-10
• 0.27 — GBU-12
• 0.28 — GBU-16
• 0.29 — GBU-24
• 0.30 — BDU-33
• 0.31 — TALD
• 0.32 — SUU-25

10028 — ATTK MODE knob

• 0.0 — CMPTR TGT
• 0.1 — CMPTR IP
• 0.2 — CMPTR PLT
• 0.3 — MAN

10029 — DLVY MODE switches

Format 0.xy:

• x — 0 STP, 1 RPL
• y — 0 SGL, 1 PRS

10030 — DLVY INTERVAL

Format 0.xy:

• x — first roller
• y — second roller

10031 — DLVY QTY

Format 0.xy:

• x — first roller
• y — second roller

10032 — MSL launch

• Launches the selected missile.

Jester LANTIRN Zoom

10035 — LANTIRN zoom level

• 0 — auto
• 0.33 — wide
• 0.66 — narrow
• 1.0 — expanded

Jester Backup (BU) Waypoint / Nav Commands

10036 — Create waypoint from trigger zone

Creates a waypoint from a trigger zone (zone selected first by 10019, or target with 10046).

• 0.01 – 0.99 — specific waypoint ID (e.g. 0.03 = wpt 3)
• 0 — last waypoint created by this command
• >= 1 — new waypoint

Also auto-selects the created/updated waypoint (as if 10037 was called), so a following command operates on it without an explicit select.

10037 — Select waypoint

Selects which waypoint Jester should perform the following operations on. Do this first, then issue the other commands.

• 0.01 — wpt 1
• 0.25 — wpt 25 (etc.)
• 0.0 — special: the most recently created waypoint through 10036

10038 — Set special designation

Sets the special designation for the selected waypoint.

• 0.0 — clear SD
• 0.1 — destination
• 0.2 — surface target
• 0.3 — fixed point
• 0.4 — initial point
• 0.5 — HA
• 0.6 — DP
• -0.1 – -0.7 — P1–P7

10039 — Transfer JDAM station

Transfers selected wpt coordinates to a station.

• 0.0 — next selected
• 0.3 — station 3
• 0.4 — station 4
• 0.5 — station 5
• 0.6 — station 6

10040 — Set LTS

• 0 — remove LTS
• 1 — set LTS

10041 — Hook selected waypoint

• 1.0 — hook selected wp
• 0.0 — unhook (if selected)

10042 — Direct-to selected waypoint

• 1.0 — direct to selected wp

10043 — Steering mode

• 0.0 — dest
• 0.33 — auto
• 0.66 — ofly
• 1.0 — man

10044 — BDHI mode

• 0.0 — HUD sync
• 0.1 — FP WP (selected with 10037)
• 0.3 — Launch Point
• 0.4 — Target

10045 — TCN / EGI select

• 0.0 — EGI
• 1.0 — TCN

10046 — Waypoint from GGW target

Like 10019, but selects the source from a live unit's current position for 10036.

• 0.01 – 0.99 — unit named "GGWTarget01".."GGWTarget99" (value × 100 = id)

10047 — IZLID point/zone

Jester points his IR target designator at the point selected by 10019 (trigger zone) or 10046 (GGW target). The value scales the lasing duration:

• value × 60 = seconds (1.0 = 60s)
• -1 — lase until told to stop
• 0 — stop immediately

Iceman (AI Pilot) Commands

• 10080 — set heading (absolute)
• 10081 — set heading (relative)
• 10082 — set speed (absolute)
• 10083 — set speed (relative)
• 10084 — set altitude (absolute)
• 10085 — set altitude (relative)
• 10086 — navigate: fly to steerpoint
• 10087 — navigate: orbit steerpoint
• 10088 — hold current heading/speed/altitude

Sentinel

• 10099 — PROXY_last_command_sentinel (marks the end of the fixed-value range; not a usable command).